Thomson Saroglia Foil Stamper/Die Cutter

Thomson Saroglia 22″ x 29″ auto platen die cutter – foil stamper. A very versatile press. You may use it as an automatic die cutter or as a manual die cutter. Use it as a foil stamper embosser automatically or manually fed, It will handle a wide variety of materials from paper to board.


Ability for Foil Stamping, Embossing, Die Cutting, Thermal Die Cutting
Apply various types material from extra thin paper to corrugated cardboard
Operator’s console
2900 impressions per hour
110 Tons of Pressure
Center Impression Drive
Adjustable Impression Control
Over Tonnage Protection System
Dwell System
22” x 29” maximum sheet size
6” x 6” minimum sheet size
PLC Drive System
Saroglia Automatic Feeder
Telescopic Feeder Arm
Four (4) Zone Heating System
Honey Comb Chase with Quick Lock System
High Resale Value
Transverse Foil Pull System
Servo Foil Drive System
Foil Rewind System
Complete Die Cutting Equipment
Versatility- fast change over from Foil Stamping to Die Cutting
Machine can be used for Hand Feeding




1995 Bobst Type 160 Vision Die Cutter

1995BobstVision6This 1995 Bobst 160 Vision Die Cutter has an extremely low  – only 8,900 impression count.

This is a very clean press in exceptional good working condition. Will handle solid board, practically all types of corrugated board and semi rigid plastics.


Corrugated board   0.75 to 9 mm
Corrugated flute type  A, B, C, D, E, F, G, N, O,
AB, AC, BC, EB, EF, Triple wall
Solid Board max 9 mm
Semi-rigid plastics  max 9 mm

Sheet size  min 400  x  600 mm   max  1100  x  1600 mm
Speed  4500 s/h
Cutting size  max 1075  x  1600 mm
Gripper margin  11 to 18 mm
Height of cutting rules  23.8 mm


Bobst SP 1260 Foil Stamper Embosser

bobst1260f1968 Bobst SP 1260 is equipped with an Eagle foil system and heat plate. The Eagle system was installed in the late 90’s and it is in excellent working condition.

The press may be inspected in operation.

2011 Bobst VisionCut SPO 1600

2011-bobst-visioncut-1-6-212011 Bobst VisionCut 1.6

Max sheet – 62” x 43”

Min sheet – 23.5” x 15.75”

Max speed – 4,800 sph

Max pressure – 600 tons

Gripper – 11 to 18mm

Corrugated board up to triple-wall

Under power, can be tested


SHERIDAN HEAVY DUTY PLATEN DIE CUTTER 45" x 65"This is a heavy duty machine with approx 700 tons of cutting pressure. Owner states will cut 3/16 Masonite, 90 pt and 120 pt chipboard, B and C flute corrugated without issue.. This would be great for the Automotive hard board industry. Sheridan 45 x 65 Die cutting tonnage – 700 tons Max/min. sheet size 45 x 65 max, 20 x 20 min Chain and gripper bar feed Number of gripper bars = 5 Gripper margin ¼” to ½” all depending on the gripper bite allowed.

Thomson Heavy Duty Platen Die Cutter 44″ x 66″

Thomson Heavy Duty Platen Die Cutter 44" x 66"Completely refurbished Thomson Heavy Duty Die Cutter 44″ x 66″ is equipped with double mics, updated variable speed drive, AC digital speed control, and operators console. It comes with double goose neck, hardened die cutting plate and safety. It is under power for testing.

Cauhe Platen Die Cutter 65” x 120”

Cauhe Platen Die Cutter 65” x 120”This 1999 Cauhe die cutter is factory rebuilt with new pneumatic clutch and brake unit. Comes complete with hardened cutting plate, pneumatic cutting plate lifters, automatic lubrication and single motorized chase.