2008 HEIDELBEG STITCHMASTER ST 450


2008 Heidelberg Stitchmaster ST 450. saddle stitcher

8 Station track & chain
7 signature feeders – 2 x horizontal & 5 x vertical feeders
VSA 450 Cover folder/feeder
ST 450 Stitching unit with 4 x stitching heads
Side caliper with reject device
Central touch screen control for electronic monitoring and automatic make-ready
Kolbus HD 151 Three knife trimmer
Rima couter stacker delivery.

1999 MULLER MARTINI MONO BLOCK STITCHER

Muller Martini Mono Block 3005 multiple clamp perfect binder with gatherer. Comes with 18 clamps, 18 pockets, 1999 Kolbus Thee Knife Trimmer and Rima Stitcher.

Max. size 305 x 510 x 60 mm

Min. size 140 x 100 x 3 mm

Book block thickness max. 60 mm  min. 3 mm

Max. speed 6,000 cycles/hour

 

 

2001 HORIZON MODEL HT-70 THREE KNIFE TRIMMER

Horizon HT-70 has a speed of up to 200 cycles per our. Capacity up to 40 jobs can be stored in memory. Automated setup and changeover with LCD touchscreen display. Advanced safety features.

Stock Thickness: 2″

Maximum untrimmed: 12.99″ x 12.99″

Maximum trimmed: 11.81″ 11.81″

Minimum trimmed: 3.93″ x 5.59″

Brausse Platen Die Cutter 32″ x 45″

Late model Brausse 32″ x 45″ platen die cutter available in excellent working condition equipped with double mics, electronic clutch, overhead operator’s control and safety.

Reasonable for fast sale.

1992 Kolbus KM 470 PERFECT BINDER

1992 Kolbus KM 470  PERFECT BINDER COMES WITH

– hand feeding station
– 20 stations COLLATING POCKETS 801 (1995)
– in feed in perfect binder 21 clamps
– spine preparation station
– Nordson bulk melter 5507
– hotmelt spine glueing
– hotmelt side glueing
– cookling tower
– cover feeder
– Wohlenberg 3 knife trimmer year 1993
– 1st pressing unit
– 2nd pressing unit
– square delivery
– lay down delivery
– conveyor
– technical documentation

2007 Horizon AFC-544AKT Automated Cross Folder with touch screen

2007 Standard Horizon AFC-544-AKT Cross Folder 4 Buckles + Knife
MBO STAHL BAUM.

– Set-up a wide variety of fold patterns by simply touching the
corresponding icon and inputting the sheet size on the large LCD
color touchscreen. 17 fold patterns are set on AFC-566AKT.
14 fold patterns are set on AFC-564AKT

– Automated setups take just a few seconds. The LCD touchscreen
prompts the operator through all remaining settings for fast,
efficient production. All adjustments are user-friendly and
require minimal skill or training.

– Fold rollers are constructed with a combination of steel and soft
polyurethane for superior grip and sharp, consistent folding.

– Horizon’s advanced rotary suction feed system delivers fast,
consistent feeding on a wide range of paper stocks.

2006 Scott 5000 Automatic Tab Cutter and Laminator

The Scott 5000 Tabber automatically feeds, laminates and tab cuts products with the touch of a button. Turn around time is reduced while control of your job is maintained. It is a machine of choice for trade binderies or any application where control of materials provided for finishing are going to vary. It is excellent for both short and long runs. Adjustment for film lengths, tab size and position are precisely measured to .01 inch and easily repeatable.

Speed over 6,000 sheets per hour

Sheet size 14″ x 13 1/2″

Paper Capacity 2,000 sheets

Includes Scott Reinforcer with feeder

1994 IBERICA JR 105 AUTOPLATEN WITH STRIPPING

1994 Iberica JR 105 29″ x 41″ with Varioplan System heavy duty automatic die cutter made in Spain. Iberica is part of the KBA manufacturing group. The press comes with double stripping unit. It is rated at 6,000 sheets per hour and is able to run paper, paper board and corrugated board up to 28 pts.

Accessories include:

1 chase

  • top blanket
  • – heater chase

Lawson 47″ Guillotine with New Computer

Mid 80’s Lawson 47″ Heavy Duty Paper Cutter with double pull available with new Microcut computer. The cutter has been tested and checked by a Lawson mechanic who confirmed that it is in excellent working condition. This cutter is ideal for cutting heavy board and materials that require strength.

Thomson Saroglia Foil Stamper/Die Cutter

Thomson Saroglia 22″ x 29″ auto platen die cutter – foil stamper. A very versatile press. You may use it as an automatic die cutter or as a manual die cutter. Use it as a foil stamper embosser automatically or manually fed, It will handle a wide variety of materials from paper to board.

SPECIFICATIONS:

Ability for Foil Stamping, Embossing, Die Cutting, Thermal Die Cutting
Apply various types material from extra thin paper to corrugated cardboard
Operator’s console
2900 impressions per hour
110 Tons of Pressure
Center Impression Drive
Adjustable Impression Control
Over Tonnage Protection System
Dwell System
22” x 29” maximum sheet size
6” x 6” minimum sheet size
PLC Drive System
Saroglia Automatic Feeder
Telescopic Feeder Arm
Four (4) Zone Heating System
Honey Comb Chase with Quick Lock System
High Resale Value
Transverse Foil Pull System
Servo Foil Drive System
Foil Rewind System
Complete Die Cutting Equipment
Versatility- fast change over from Foil Stamping to Die Cutting
Machine can be used for Hand Feeding